Archive for the ‘delta’ tag

delta 34-895 miter gauge

leave a comment

Delta Table Saw 34-895 miter gauge is designed for machines with Delta 3 / 8 x 3 / 4 inch below the tabs. It has a heavy steel, and a range of 120 degrees at the corner of the many cuts and shapes. Installation is quick and easy, and the size is adjustable with stops at 45 and 90 degrees. The system is drilled and tapped in the terminal 34-568 (sold separately), which further improves the accuracy to confirm.

Please visit biesemeyer 78-939 table saw cut-off stop for t-square fences and delta 50-330 31-1/2-inch tall universal stand with 19-1/2-inch by 10-inch table top for more detail.

Written by admin

December 9th, 2010 at 12:40 pm

Posted in channel

Tagged with ,

bandsaw cool blocks for delta 14″

leave a comment

Replace the original metal guide blocks come with Delta Band Saw with Cool Blocks. consisting of graphite impregnated with phenolic resin, the nearest fresh blocks all blocks of the plate, allowing a reduction of more stable and accurate. Cool Blocks eliminate friction and heat made the metal to metal contact, so the best spreadsheet calm, cool and well above the metal traces. blocks to the performance of some new band saw improvement, and quickly pays for itself by extending the life of the leaves. Available in packs of four

For related content, please visit bandrollers – fits delta 14″.

Written by admin

December 8th, 2010 at 9:49 pm

Posted in channel

Tagged with ,

magnate m72.5c14h6 carbon tool steel bandsaw blade, 72-1/2″ long – 1/4″ width; 6 hook tooth

leave a comment

steel strip Carbon tool blade is made from a high carbon content. You can cut all types of forests, especially suitable for soft wood or pole pine, fir and spruce. It ‘also good for cutting plastic, aluminum and steel. For best results, cut mild steel at speeds of up to 200 FPM (feet per minute), with the coolant along the back of the blade Delta Band Saw

Read more content at zero clearance bandsaw inserts (set of 5), for delta bandsaws.

Written by admin

October 9th, 2010 at 5:29 pm

Posted in channel

Tagged with , ,